- 16-Port Full Gigabit Managed Industrial PoE Switch
Model : SNY-UFB88197FEP-3E
Brand Snappy
Model SNY-UFB88197FEP-3E
Interface characteristics
Fixed port
- Power-off alarm switch (FAULT)
- 1*RS232 console port (115200, N, 8, 1)
- 8*100/1000Base-X uplink SFP slot ports (Data)
- 16*10/100/1000Base-T PoE ports (Data/Power)
- 2 set of V+, V- redundant DC power interface (6 Pin Phoenix terminal)
Ethernet port Port 1-16 support 10/100/1000Base-T auto-sensing, full/half duplex MDI/MDI-X self-adaption
Twisted pair transmission
- 10BASE-T: Cat3, 4, 5 UTP (≤100 meter)
- 100BASE-TX: Cat5 or later UTP (≤100 meter)
- 1000BASE-T: Cat5e or later UTP (≤100 meter)
Optical fiber port Gigabit SFP optical fiber interface, default no include optical modules (optional order single-mode/multi-mode, single fiber/dual fiber optical module. LC)
SFP port expansion Turbo overclocking 2.5G optical module and ring
Optical cable/distance Multi mode: 850nm/0-500M, Single-mode: 1310nm/0-40KM, 1550nm/0-120KM
Chip parameter
Network management type L2+
Network protocol
- IEEE802.3 10BASE-T; IEEE802.3i 10Base-T
- IEEE802.3u 100Base-TX
- IEEE802.3ab 1000Base-T
- IEEE802.3z 1000Base-X
- IEEE802.3x
Forwarding mode Store and Forward (Full Wire Speed)
Switching capacity 256Gbps
Forwarding Rate@64byte 35.71Mpps
MAC 8K
Buffer memory 8M
Jumbo frame 9.6K
LED indicator Power: PWR (Green), System: SYS (Green), Network: Link (Yellow), Fiber Port : L/A (Green), PoE: PoE (Green)
Reset switch Yes. press and hold for 10 seconds and then release to restore factory settings
PoE & Power
PoE port Port 1 to 16
PoE management
- Total power limit of PoE power supply
- PoE output power allocation, PoE on/off & af/at
- PoE working status, Delay start of power supply
- PoE output priority configuration, Scheduling of PoE operation and time
Power supply pin Default: 1/2 (+) 3/6 (-)
Max power per port 30W, IEEE802.3af/at
Power consumption Standby<15W, Full load af<240W, at<400W
Working voltage DC48-57V, 6 Pin industrial Phoenix terminal, support anti-reverse protection
Power supply 48V/240W industrial power supply
Physical parameter
Operation TEMP/Humidity -40~+80°C; 5%~95% RH Non condensing
Storage TEMP/Humidity -40~+85°; 5%~95% RH Non condensing
Dimension (L*W*H) 166*149*89mm
Net/Gross weight <2.2kg/<2.8kg
Installation Desktop, DIN rail
Gigabit access, SFP port uplink
- Support non-blocking wire-speed forwarding.
- Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.
- Supports Ethernet port and SFP port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
Intelligent PoE power supply
- IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
- PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
- 16*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage and other scenarios.
- Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
Strong business processing capability
- ERPS/STP/RSTP/MSTP.
- Static and dynamic aggregation.
- IGMP V1/V2 and IGMP Snooping.
- IEEE802.1Q VLAN, flexible VLAN division, voice VLAN and QinQ configuration.
- QoS, Priority mode based on 802.1P, Port & DSCP, Queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
- ALC, filter data packet through configuring matching rules, processing operation & time permission and provide flexible and safe access control.
Security
- 802.1X authentication.
- Port isolation, Storm control.
- IP-MAC-VLAN-Port binding.
Stable and reliable
- CCC, CE, FCC, RoHS.
- Low power consumption, no fan, aluminum shell.
- The user-friendly panel can show the device status through the LED indicator of PWR, SYS, Link, L/A, PoE.
- The DIN rail industrial switch series products do not have a power supply by default and need to be purchased. Users can purchase a power supply independently developed by SNY.
Easy operation and maintenance management
- HTTPS, SSLV3, and SSHV1/V2.
- RMON, system log, LLDP, and port traffic statistics.
- CPU monitoring, memory monitoring, Ping test, and cable diagnose.
- Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).